Wear and tear is a common problem of mechanical equipment. Of course, the main factor affecting the normal use of equipment is also the abnormal wear of equipment parts. For the steel bar bending machine and Stirrup Bending Machine, slight errors in the operation of the staff may cause the wear of equipment parts, which will affect the normal use of the equipment over time.
In our daily work, there are usually many ways to cause the wear of the Steel Bar Bending Machine and stirrup bending machine, thereby shortening the service life of the steel bar bending machine and cutting machine. The following are some common mistakes that we initially summarized. Hope we can pay more attention to and maintain our equipment in peacetime.
![](https://www.skzmachinery.com/wp-content/uploads/2020/12/skz-2020122209503198.jpg)
- In our actual application, there are many related operators who do not know how to operate the machine or the mechanical performance of the machine correctly. It may be improper operation of the machine. This will cause damage to the steel bending machine.
- We must clearly know the load of our mechanical equipment to prevent mechanical damage due to excessive load in use.
- The load of the steel bar bending machine must be accelerated evenly in order to replace the machine under a relatively stable load.
- The reason for the wear of the steel bar bending machine is that the protection work is not in place. This can cause oil to spill over part of the bend hoop. It has a great impact on the original operating environment, leading to increased wear and tear during operation. Under the influence of many factors, the operating frequency of the parts increases and causes the operation to fail.
Our company also provides a High-Precision Stirrup Bending Machine, please feel free to contact us if you need it